G-Code Sprint Back to site
G-code basics archive

All posts.

523 posts · page 2 of 44.

Posts, page 2 of 44

Code reference

G92 vs G54: Coordinate Shift vs Work Offsets

G54 stores part zero in a table; G92 declares it from wherever the tool stands. Why shops run on offsets, printers run on G92, and how to defuse legacy code.

Lawrence Arya··10 min
Code reference

G65 Macro Call vs M98 Subprogram: Which and When

M98 replays a fixed subprogram; G65 passes arguments into local variables. How each call works, the portability catches, and a worked example both ways.

Lawrence Arya··10 min
Code reference

G84 vs G74: Tapping Cycles Explained Simply

G84 taps right-hand threads, G74 left-hand, both locked to one pitch per revolution. Feed math, rigid tapping vs float holders, and the classic tap killers.

Lawrence Arya··10 min
Code reference

G09, G61, G64: Exact Stop vs Path Smoothing

Why sharp corners come out rounded and small moves stutter: how G09, G61, and G64 trade corner accuracy against feed rate, and when to use each.

Lawrence Arya··10 min
Code reference

G98 vs G99: Canned Cycle Return Planes Explained

G98 retracts to the initial level, G99 only to the R plane. How to mix them around clamps, the lathe feed-mode trap, and the cycle time G99 really saves.

Lawrence Arya··10 min
Code reference

G94 vs G95: Feed per Minute vs Feed per Rev

G94 reads F as units per minute, G95 as units per spindle revolution. What each mode does, where it is the default, and the two crashes mixing them causes.

Lawrence Arya··11 min
Code reference

Coduri G și M pentru strung CNC: lista esențială

Codurile G comandă mișcarea, codurile M comandă funcțiile mașinii. Iată codurile esențiale pentru strungul CNC și particularitatea diametrului pe axa X.

Lawrence Arya··10 min